Extra narrow 1″ wide support allows for positioning under narrow sink rails
- The clamp is compatible with other BLICK suction cups and supports
- Removable hand knob for convenient tightening
| Included in Kit | Part Number |
|
13-300-10 |
| Sink Rail Support Specs: | |
| Clamping Range | Up to 4 cm of material |
| Top Surface Area | 10.62 in² |
| Base Surface Area | 62.5 in² |
| Base Dimensions | 150 x 300 mm (5.9″ x 11.81″) |
| Bottom Seal | 12-150-30-11 |
| Open Clamp Distance with Base | 4.5 cm (1.79″) |
| Closed Clamp Distance with Base | 0.6 cm (0.24″) |
- Position the support as you would any other suction cup.
- Run your perimeter profile.
- Pause the machine and attach a large edge clamp to the support clamp.
- Cut out and edge your bowl hole.
| Large Edge Clamp Specs: | |
| Clamping Method | Mechanical Screw |
| Clamping Area (Top) | 66 mm Depth x 152 mm Width (2.625″ x 6″) |
| Material Thickness | Up to 4 cm (1.57″) |
| Closed Clamp Distance | 3 cm (1.81″) |
- Prevents corner blowout and small pieces from moving and provides extra support for fragile regions such as sink rails
- Designed to mount on all BLICK Suction Cups and Supports
- Low-Profile unlike a C clamp
- Handle included
- Non-marking
FAQ
| Category | Question |
|---|---|
| Suction Cups | Q: What length should I cut my Top Seals? A: For the cut lengths for both your Top and Bottom Seals, see the link here for instructions on how to replace your seal. There you will find a chart to reference the cut lengths. |
| Location Devices | Q: Can Locating Pins be used as fences? A: No, Locating Pins can not be used as fences. They are not designed to withstand any significant amount of force. See the link here to see our line of Vacuum Fences |
| Fittings | Q: How do I properly remove tubing? A: Push in the collar of the fitting until it clicks, then pull out the tubing. Pulling out the tubing without pushing down the collar will damage the fitting. |
| Tools & Accessories: Vacuum Systems | Q: I have a vacuum leak. How do I find it? A: To locate a leak in your system, use the Isolator Kit to quickly and efficiently find where problem is, see the link here for instructions on how to pinpoint your leak and how to set things right. |
| Services & Repairs | Q: Do you guys do repairs? A: Yes, we do. Go to the link here to see how to get your BLICK tools fixed. |
| Services & Repairs | Q: I have "ghosting" on my piece, how do I prevent this? A: Here's how; see the link here |
Downloads
Sink Rail Support Kit
Original price was: $370.00.$305.00Current price is: $305.00.
Prevent sink rail breakage!
You may also like…
$255.00
Select options This product has multiple variants. The options may be chosen on the product page$175.00
$10.86
