Locating Pins consist of a vacuum base and a removable pin. The Removable Pin is placed over the stainless steel pin on the base during setup and then removed during the machine cycle.
- For accurately locating a workpiece on CNC machines using the spindle
- More accurate than a laser
- Provides a simple, cost-effective solution
- Locate pins with the Stop Locator Tool
| Height (READ ME) |
Part # |
| 105 mm | 11-301-01-105 |
| 120 mm | 11-301-01-120 |
| 150 mm | 11-301-01-150 |
| 160 mm | 11-301-01-160 |
| 180 mm | 11-301-01-180 |
| 200 mm | 11-301-01-200 |
| Info. | Specs. |
| Stop Method | Removable Pin |
| Base Surface Area | 25.2 in2 |
| Base Dimensions | 150 mm Diameter (5.91″) |
| Bottom Seal Part # | 11-301-01-11 |
NOTES:
- Available in ANY height and most popular fitting sizes.
- Uses the same Removable Pins as Table Edge Locating Pins.
- Replacement pin available with laser target
(Part Number: 1-301-01-73) Contact Us for More Info. - Locating Pins are for locating ONLY and not for stabilizing material. See Vacuum Fences
FAQ
| Category | Question |
|---|---|
| Suction Cups | Q: What length should I cut my Top Seals? A: For the cut lengths for both your Top and Bottom Seals, see the link here for instructions on how to replace your seal. There you will find a chart to reference the cut lengths. |
| Location Devices | Q: Can Locating Pins be used as fences? A: No, Locating Pins can not be used as fences. They are not designed to withstand any significant amount of force. See the link here to see our line of Vacuum Fences |
| Fittings | Q: How do I properly remove tubing? A: Push in the collar of the fitting until it clicks, then pull out the tubing. Pulling out the tubing without pushing down the collar will damage the fitting. |
| Tools & Accessories: Vacuum Systems | Q: I have a vacuum leak. How do I find it? A: To locate a leak in your system, use the Isolator Kit to quickly and efficiently find where problem is, see the link here for instructions on how to pinpoint your leak and how to set things right. |
| Services & Repairs | Q: Do you guys do repairs? A: Yes, we do. Go to the link here to see how to get your BLICK tools fixed. |
| Services & Repairs | Q: I have "ghosting" on my piece, how do I prevent this? A: Here's how; see the link here |
Downloads
50 mm Locating Pin
Price range: $245.00 through $255.00
Locating Pins provide rigid, repeatable reference points for quick and easy locating.
NOTICE: Order Locating Pins according to the corresponding suction cup operating height.
SEE EXAMPLE: 105 mm Height Locating Pin pairs with 105 mm height Suction Cup.
