The ability to place stops at exact XY locations on your table makes setting up rectangular and irregular shapes a snap.
- Eliminates the need to probe or edge-find workpieces.
 |
 |
|
| Once the spindle is in the desired location, the Locating Pin is placed under the stop locator tool. | The spring-loaded handle is pulled down and a hole in the plastic pin is lined up with the point on the tool.
Vacuum is applied to the stop, fixing its location directly below the spindle. |
Locating holes on all BLICK Suction Cups. |
| Part Number | 19-102-11 |
| Tool Height | 119.312 mm (4.697 in.) |
| Extension Height | 33.020 mm (1.300 in.) |
| Total Extended Height | 152.332 mm (5.997 in.) |
*This new and improved Stop Locator Tool. It is more accurate at full extension than the previous version of the Stop Locator Tool.
NOTE: Customer must supply 1/2″ gas tool holder.
FAQ
| Category | Question |
|---|---|
| Suction Cups | Q: What length should I cut my Top Seals? A: For the cut lengths for both your Top and Bottom Seals, see the link here for instructions on how to replace your seal. There you will find a chart to reference the cut lengths. |
| Location Devices | Q: Can Locating Pins be used as fences? A: No, Locating Pins can not be used as fences. They are not designed to withstand any significant amount of force. See the link here to see our line of Vacuum Fences |
| Fittings | Q: How do I properly remove tubing? A: Push in the collar of the fitting until it clicks, then pull out the tubing. Pulling out the tubing without pushing down the collar will damage the fitting. |
| Tools & Accessories: Vacuum Systems | Q: I have a vacuum leak. How do I find it? A: To locate a leak in your system, use the Isolator Kit to quickly and efficiently find where problem is, see the link here for instructions on how to pinpoint your leak and how to set things right. |
| Services & Repairs | Q: Do you guys do repairs? A: Yes, we do. Go to the link here to see how to get your BLICK tools fixed. |
| Services & Repairs | Q: I have "ghosting" on my piece, how do I prevent this? A: Here's how; see the link here |
Downloads
Stop Locator Tool
$335.00
