Excellent backup option for any CNC machine. Don’t let your vacuum pump stop your production. If your pump fails, simply run a shop air line to the Venturi Manifold and you are back in business.
|Number of Vacuum Ports||1 Port|
|Air Consumption||1.5 CFM @ 85 psi|
|Vacuum Range||0-26 in Hg|
|Gauge||1.5″ Liquid Filled Gauge|
|Input Port||8mm OD Tube|
Note: Air Regulator must be used, higher pressures can damage manifolds.
When ordering suction cups, we’ll need to know what height you need, and what air fitting size you are using. The height is defined as the distance from the aluminum base of the suction cup to the top of the hard rubber bearing surface on top of the suction cup. It is important not to include the top seal in the measurement. The air fitting size is the outside diameter of the tubing that you are using.
To obtain precision height measurements, the suction cup must be held down to a flat surface by vacuum (using its own base) and the top of the hard rubber bearing surface must be measured using a height gauge. Since most fabricators do not have this equipment, we recommend sending a sample to us to be measured.