Pneumatic Reference Pin

$395.00

Provides a repeatable rigid reference point for setup, which can be lowered to provide clearance for cutting tools while the machine is in operation.

Designed for CMS (Brembanna) and Loffler machines with an operating height of 200 mm.

  • Made to the same specifications as the reference pins that come with your machine.
  • Compatible with BLICK INDUSTRIES Stop Locator Tool
Machine CMS (Brembanna) Loffler
Part Number 11-601-01 11-801-01
Stop Disc Diameter 35 mm 75 mm
Table Reference Pin Diameter 12 mm 15 mm
Machine Height* 200 mm (7.87″)
Height in Down Position 170 mm (6.7″) 160 mm (6.3″)
Height in Up Position 223 mm (8.8″) 213 mm (8.4″)
Base Surface Area 41 in²
Base Dimensions 200 mm (7.87″)
Bottom Seal Part # 11-601-01-13

NOTE:

  • Available in 6 mm and 8 mm air-fitting configurations
  • Only available for machines with a 200 mm working height
  • Requires EasyStone Installation (Complimentary installation is offered on all BLICK Products, call or email to schedule an installation.)

How to Measure Fittings & Suction Cup Heights

CATEGORY

DOCUMENT

LINK

SIZE

Catalog

2022 BLICK INDUSTRIES Catalog

https://www.blickindustries.com/wp-content/uploads/2022/06/BLICK_2021_Catalog_20220620_web.pdf

22 MB

Fittings

How to Measure Suction Cup Heights & Air Fittings

https://www.blickindustries.com/wp-content/uploads/2020/02/BLICK_Fittings-SuctionCups_20200210_Measurments.pdf

397 KB

Suction Cups

Anatomy of a Suction Cup

https://www.blickindustries.com/wp-content/uploads/2022/06/Anatomy200x200_20220620.pdf

2 MB

Suction Cups

Suction Cup Seal Lengths

https://www.blickindustries.com/wp-content/uploads/2019/10/SuctionCup_SealChart_20191009.pdf

829 KB

Fittings

How to Measure Valves

https://www.blickindustries.com/wp-content/uploads/2020/12/BLICK_Valve-Port-Mani_20201202_Measur.pdf

333 KB

Tools & Accessories

Leatherheads & Accessories

https://www.blickindustries.com/wp-content/uploads/2021/02/BLICK_LeatherheadsAccessories_20210218.pdf

2.24 MB

Forms

Repair Form

https://www.blickindustries.com/wp-content/uploads/2021/04/BLICK_Repair-Form_20210426.pdf

84 KB

Locating Devices

Dimensions Diagram - 26 mm Edge Locating Pin

https://www.blickindustries.com/wp-content/uploads/2020/09/BLICK_26mm-Edge-Locat-Pin_20200803.pdf

Locating Devices

Dimensions Diagram - 50 mm Edge Locating Pin

https://www.blickindustries.com/wp-content/uploads/2020/09/BLICK_50mm-Edge-Locat-Pin_20200803.pdf

484 KB

Locating Devices

Dimensions Diagram - 50 mm Edge Locating Pin EL

https://www.blickindustries.com/wp-content/uploads/2020/09/BLICK_50mm-Edge-Locat-Pin-EL_20200803.pdf

483 KB

Manifolds

Incoming Vacuum Lines - Manifold for INTERMAC Machine (Right)

https://www.blickindustries.com/wp-content/uploads/2020/08/21-101-02_Intermac-Mani_20200828.pdf

844 KB

Manifolds

Incoming Vacuum Lines - Manifold for INTERMAC Machine (Left)

https://www.blickindustries.com/wp-content/uploads/2020/08/21-101-01_Intermac-Mani_20200828.pdf

855 KB

Manifolds

Replacement Parts - Intermac Manifolds

https://www.blickindustries.com/wp-content/uploads/2020/08/INTERMAC-Mani_Replace-Parts_20200828.pdf

134 KB

Locating Devices

Height Diagram - Stop Locator Tool

.blickindustries.com/wp-content/uploads/2020/08/Stop-Locator-Tool-Diagram.pdf">https://www.blickindustries.com/wp-content/uploads/2020/08/Stop-Locator-Tool-Diagram.pdf

929 KB

Tools & Accessories

Dressing Tool Assembly & Body Lengths

https://www.blickindustries.com/wp-content/uploads/2020/08/20-022-0x_Dressing-Tool-Assembly_20190520_All_1920.pdf

1 MB

Clamps

Overview - Backsplash Clamp System

https://www.blickindustries.com/wp-content/uploads/2018/06/BSClampInstructions.pdf

66 KB

Manifolds

Blowback Kit Setup Diagram

https://www.blickindustries.com/wp-content/uploads/2021/03/BlowbackKit_SetupDiagram_20210219.pdf

38 KB


This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.
Read more