Available in ANY height and most popular fitting sizes.
Use this cup to setup parts on your machine by laying the edge of the granite on the overhanging ledge. This will save your seals from wearing out.

• Fits up to 4 Blick Pods.
• The rack mounts to wall or to the front of a machine horizontally or vertically.
• Custom lengths available.
• Additional Suction Cup Hangers are available upon request

• Fits up to 6 Blick Pods.
• The rack mounts to wall or to the front of a machine horizontally or vertically.
• Custom lengths available.
• Additional Suction Cup Hangers are available upon request

Helpful Ordering Information
 
This cup can be made at ANY height and is available in most popular fitting sizes.
 

Approximate Dimensions: 125 X 290 X 40mm (5" X 11.5" X 1.6")
Air Fitting Sizes: 6mm, 8mm, 10mm, 12mm, 1/4",3/8", 1/2"
 
For applications where a vacuum pump does not exist. Only a compressed air line is needed. Contains 1
compressed air input port and 5 output vacuum ports. Recommended air requirements 1.5 CFM @ 80 psi.

Allows long strips of material to be held vertically and cut down thinner. (i.e. 3cm to 2cm) Recommended 4 cups for 10 ft lengths of material. Has a soft rubber bottom seal for sealing on surfaces that are not smooth.

Multiple mounting options.
Option 1: Using thru holes for rigidly mounting the base to a table.
Option 2: Vacuum the base down to the table.

A vacuum source will be needed.
Recommended: Venturi 5 Port Manifold

• Use these cups when working on thick blocks requiring extra Z clearance.
• 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
• Available in most popular fitting sizes.

• Use these cups when working on thick blocks requiring extra Z clearance.
• 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
• Available in most popular fitting sizes.