Suction Cups - Low Profile
|
|
| |  |
 |
|
Go directly to Page: | 1
| 2
|
|
|
|
Page 1 of 2
|
| 200 X 200 mm - Low Profile Cup ( 7.87 X 7.87 in ) | | Part Number: 29-200-10 | |
| | Height: 50mm or 55mm | Top Surface Area: 57.5 sq. in. | Base Surface Area: 57.5 sq. in. | Bottom Seal: 12-200-10-11 | Top Seal: 12-200-10-04 |
| |  |
- Use these cups when working on thick blocks requiring extra Z clearance.
- 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
- Available in most popular fitting sizes.
|
|
|
| | 150 X 150 mm - Low Profile Cup ( 5.91 X 5.91 in ) | | Part Number: 29-150-10 | |
| | Height: 50mm or 55mm | Top Surface Area: 31.25 sq. in. | Base Surface Area: 31.25 sq. in. | Bottom Seal: 12-150-10-11 | Top Seal: 12-150-10-04 |
| |  |
- Use these cups when working on thick blocks requiring extra Z clearance.
- 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
- Available in most popular fitting sizes.
|
|
|
| | 150 mm Round Low Profile ( 5.91 in ) | | Part Number: 29-150-01 | |
| | Height: 50mm or 55mm | Top Surface Area: 22.5 sq. in. | Base Surface Area: 22.5 sq. in. | Bottom Seal: 12-150-01-11 | Top Seal: 12-150-01-04 |
| |  |
- Use these cups when working on thick blocks requiring extra Z clearance.
- 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
- Available in most popular fitting sizes.
|
|
|
| | 150 X 240 mm Low Profile ( 5.91 X 9.45 in ) | | Part Number: 29-150-14 | |
| | Height: 50mm or 55mm | Top Surface Area: 55 sq. in. | Base Surface Area: 55 sq. in. | Bottom Seal: 12-150-14-11 | Top Seal: 12-150-14-04 | Base Dimensions: 150 X 240 mm ( 5.91 X 9.45 in ) |
| |  |
- Use these cups when working on thick blocks requiring extra Z clearance.
- 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
- Available in most popular fitting sizes.
|
|
|
| | 70 X 240 mm Low Profile ( 2.76 X 9.45 in ) | | Part Number: 29-070-12 | |
| | Height: 50mm or 55mm | Top Surface Area: 22.3 sq. in. | Base Surface Area: 22.3 sq. in. | Bottom Seal: 12-070-12-11 | Top Seal: 12-070-12-04 | Base Dimensions: 150 X 240 mm ( 5.91 X 9.45 in ) |
| |  |
- Use these cups when working on thick blocks requiring extra Z clearance.
- 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
- Available in most popular fitting sizes.
|
|
|
| | 75 X 300 mm ( 2.95 X 11.81 in ) | | Part Number: 29-075-01 | |
| | Height: 50mm or 55mm | Top Surface Area: 25 sq. in. | Base Surface Area: 25 sq. in. | Bottom Seal: 12-075-01-11 | Top Seal: 12-075-01-04 | Base Dimensions: 75 X 300 ( 2.95 X 11.81 in ) |
| |  |
- Use these cups when working on thick blocks requiring extra Z clearance.
- 55mm(2.17in) height version has 17mm(.67in) milled slots for mechanical hold downs, NOT available in the 50mm height version.
- Available in most popular fitting sizes.
|
|
|
|
|
Go directly to Page: | 1
| 2
|
|
|
|
Page 1 of 2
|
|
